| Rfid Reader 15693 |
| |
- Classification:Hardware/embedded - Microprocessor(ARM-PowerPC)
- Development Tool:VC
- Sise:31.0 KB
- Upload time:2011/4/18 4:58:59
- Uploader:pu2smj
- Download Statistics:
|
| Description |
ISO15693 Rfid reader source code
File list:
BR_M_1356_112.c
crc.c
ISO15693.h
level0.c
level01.c
level1.c
my_crc.c
my_fat32.C
my_fat32.h
If you are a member, Log in. If you are not a member, Please register
|
| Related source code |
[U2270b 125k RFID code] - U2270b 125k RFID code
using cpu PHILIPS "p89C51RD2BN"
[rfid sniffer kit] - rfid sniffer kit.Radio frequency identification (RFID) is an area of automatic identification that has quietly been gaining momentum in recent years and is now being seen as a radical means of enhancing data handling processes, complementary in many ways to other data capture technologies such as bar coding. RFID systems involve the use of robust tags that permits the operator to collect data and manage it in a portable, changeable database. A basic RFID system consists of three components: an antenna, a reader and a transponder, widely known as a tag. The antennas, attached to the reader and the tags, are the conduits between the two, which control the system’s data acquisition and communication. The tag contains an electronic microchip, as shown in Figure 1, which is fabricated as a low power integrated circuit (IC). Depending on the device application, the tag memory may comprise ROM, RAM, non-volatile programmable memory (EEPROM, Flash) and data buffers.
Transponders are being developed and employed at different frequencies, ranging from the low frequency region of 125 kHz to the microwave region of 5.8 GHz to satisfy a wide range of applications. The applications include access control, automatic data collection, livestock tracking, inventory management and factory automation.
[RFID Code] - Source Code for Volare UHF Reader firmware.
[RFID Application for Samsung RFID re...] - Samsung Techwin Handheld RFID Reader Application
[analysis of rfid devices] - embedded security analysis of rfid devices
[RFID design] - This is a document for design a RFID reader based on MFRC500 RFID Chip
[RFID Reader] - This is a project to make a rfid reader based on mifare 13.56Mhz card and reader of NXP.
[MFRC500 RFID Code] - This is the free source code for MFRC500 RFID mifare reader 13.56MHz. Interface with 8051 core microcontroller
[I have written procedures for RFID r...] - I write RFID read/write program source code (U2270) for your reference the complete source code.
|
| Download Address |
 DownLoad
|
| Comments: Don't forget to comment after downloading! Comment... |
|
